BARTON Elite NATO® Style Watch Strap - 18mm, 20mm, 22mm or 24mm

Crafted from premium seatbelt weave nylon with custom stitching and 316L surgical grade stainless steel, our Elite NATO Military Style straps are the top of the line when it comes to nylon watch bands. These waterproof and washable straps are fit for all occasions.

Material: Seatbelt weave nylon, 1.4mm thickness Hardware: 316L surgical grade stainless steel Widths: 18mm, 20mm, 22mm & 24mm Length: 10.5 inches (270mm) | Fits wrists from 5"- 8" inches in circumference

SWAP IN SECONDS: No need to remove spring bars to swap different color combinations in and out. Buy multiple and swap in seconds for a new look daily!

SELECT PROPER WIDTH: Available in 18mm, 20mm, 22mm and 24mm widths to fit thousands of watch models. To determine proper width for your watch, use a metric ruler to measure the lug width of your watch or the width of the current band at the point where it attaches. If your watch has an odd lug width (19mm, 21mm or 23mm), we recommend going with the strap 1mm larger than measured. The material is soft and should squeeze in nicely.

OPTIMAL LENGTH: All widths (18mm, 20mm, 22mm & 24mm) measure approximately 10.5 inches (270mm) in length not including the buckle and fit wrists from 5" to 8" in circumference. However, watch size and geometry also impacts fit. If the band is initially longer than desired, fold the free end neatly back into the keeper loop or cut to the desired length. If trimmed, expose the cut end to match or lighter flame to avoid fraying.

SEATBELT NYLON and SURGICAL GRADE STAINLESS STEEL: Seatbelt style nylon weave 1.4mm in thickness. Perfect to fit the vast majority of watches while remaining lightweight, breathable and very sturdy. Buckle fabricated from 316L surgical grade stainless steel. All materials are hypoallergenic.

LASER CUT, PREMIUM STITCHING, WATER PROOF and WASHABLE: Laser cut to eliminate fraying; Custom stitched with clean lines to provide style and strength. Stink resistant and machine washable.

COMPATIBLE LUG WIDTHS: These bands are compatible with any traditional watch that uses standard 18mm, 20mm, 22mm, or 24mm spring bars. If your watch has an odd lug width of 19mm, 21mm, or 23mm, select the strap that is one mm wider. The strap will squeeze in nicely.

ATTACHING THE STRAP: Refer to the diagram in the picture above. First, remove the original band and reinsert spring bars into the watch head (replacement spring bars sold separately if needed). Then, simply feed the leather strap between the spring bar and watch casing, behind the watch head, and up through the other spring bar. Run through the leather ring on the short strap to secure the watch head. No need to remove spring bars (pins) to swap between different colors.

WRIST SIZING: All of our standard straps are designed to fit wrists between 5 1/2 and 8 inches in circumference. However, the size and geometry of the watch will also impact the fit.

product information: